• Jaytee
  • Phone No.
  • +91 78273 62841
  • Email Us
  • sales@jayteealloys.com
  • Jaytee
Contact Us

Liquid Metal



bismuth alloys

Introduction

These gallium-based alloys are non-toxic in nature and replacement for toxic mercury. The gallium-based alloys have far lower vapour pressure and toxicity of then mercury.


Excellent Thermal and Electrical Conductivity

Liquids metals conduct heat and electricity due to their valence electrons. This is very effective conduction mechanism is a property of liquid metals and alloys. Liquid metals are used in applications for dissipating concentrated heat loads such as thermal interfaces for Microprocessors, reactors, and heat exchangers. Liquid gallium alloys are inherently high-density and low-viscosity (similar to that water, <8 cP at room temperature). As an electrically conductive metal, gallium alloys are used for mercury replacements in switches and contacts.

Wetting to Metallic and Non-Metallic Surfaces

These alloys will wet to most metallic and non-metallic surfaces. This wetting behavior and lubricity enable gallium alloys to serve as high-temperature lubricants in journal bearings. However, gallium will attack (it alloys with) some metals, even at room temperature, at higher temperature gallium dissolves most metals although the refractory metals.

Gallium is particularly aggressively react to Aluminium; care should be taken to avoid contact with aluminium components.

Liking indium, gallium and gallium alloys have the ability to wet to many non-metallic surfaces such as glass and quartz. Gently rubbing the gallium alloys onto the surface may help induce wetting.

Applications

Typical application for these materials includes thermostats, switches, barometers, heat transfer systems, thermal cooling, and heating designs, and TIM2 interfaces.

Packaging

Alloys are packaged in polyethylene bottles and 5cc, 10cc, 50cc and syringes, are shipped in accordance with applicable federal regulations.

Note: Gallium has the property of expand like Bismuth on solidify due to this. These alloys should not be stored in glass bottles below the melting temperature.

Storage and Shelf Life

Unopened bottles and syringes has a shelf life of one year. Syringes should be stored in upright position with the tips down. It storage in dry an cool placed (below 20℃)



JAYTEE ALLOYS CAN SUPPLY BULK QUANTITIES OF LIQUID METAL AT BEST POSSIBLE RATES. IT CAN ALSO MANUFACTURES VARIOUS KINDS OF LIQUID METAL AND CAN SUPPLY AS PER CUSTOMER REQUIREMENT. KINDLY CONTACT US FOR MORE INFORMATION

Contact Us